Bits For Every Job
Specifically Configured For Your CarveWright System
CarveWright Bits have been rigorously tested to ensure the best results with CarveWright CNC Systems. Futhermore, each bit’s specifications are already in the software with all the needed feed and speed rates pre-programmed for true plug-n-play functionality.
CARVING BITS
Carving bits are used for the carving or “raster” functions the CarveWright system is famous for.
These bits are what you use for the detailed pattern carving and shaping.
1/16” Carving Bit (White)
The default carving bit included with every CarveWright CNC.
Specifications
- 1/16” Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 0.800”
- Selectable with all versions of Designer
1/8″ Carving Bit (Green)
For carving foam and soft materials such as balsa or foam.
Specifications
- 1/8” Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.000”
- Selectable with all versions of Designer
3/16” Carving Bit (Purple)
For faster carving of large detail projects.
Specifications
- 3/16” Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.000”
- Selectable with all versions of Designer
1/32” Carving Bit (Lime)
For fine detail carvings such as lithophanes.
Specifications
- 1/32” Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 0.800”
- Requires Designer 3 or higher
1/16" Long Carving Bit (Red)
For fine detailed deep carvings.
Not for use with the Rotary Jig.
Specifications
- 1/16” Long Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 2.125”
- Requires Designer 3 or higher
1/8" Long Carving Bit (Blue)
For deep carving in hard materials and for use with the Rotary Jig.
Specifications
- 1/8” Long Ballnose
- 1/2" NO SLIP Hard Pressed Adaptor
- Tapered 3 Flute Up Spiral
- Solid Carbide
- Max Depth 2.125”
- Requires Designer 3 or higher
CUTTING BITS
Cutting bits are used mostly for doing vector cutout functions.
The bit will follow a path, or line, designated in the software to cut an object out, drill holes, or route lines into the material.
1/16” Cutting Bit
For shallow fine detail and intricate vector cuts.
Specifications
- 1/16” Endmill
- Straight 3 Flute Up Spiral
- Solid Carbide
- Max Depth 1/4”
- Includes 1/4″ Split Collet (unless specified)
- Selectable with all versions of Designer
1/8” Cutting Bit (Orange)
For vector cuts in soft or medium hard materials.
Specifications
- 1/8” Endmill
- 1/2" NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.100”
- Selectable with all versions of Designer
3/16” Cutting Bit (Yellow)
For vector cuts in hard or dense materials.
Specifications
- 3/16” Endmill
- 1/2" NO SLIP Hard Pressed Adaptor
- Straight 3 flute Up Spiral
- Solid Carbide
- Max Depth 1.100”
- Selectable with all versions of Designer
DECORATIVE ROUTER BITS
Configured specifically for the CarveWright System, our top quality carbide decorative bits are designed for long-life and precise cutting performance. These bits are used for a variety of different routing functions.
1/4″ Ball Nose
Two flute, 1/4" steel shank, carbide tipped, with 1/4" diameter ball end. This ball nose bit is extremely versatile and can be used for decorative line carving, carving profiles, edge work and engraving.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
1/2″ Ball Nose
Two flute, 1/4" steel shank, carbide tipped, with 1/2" diameter ball end. This ball nose bit is extremely versatile and can be used for decorative line carving, carving profiles, edge work and engraving.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
60º V Bit
Two flute, 1/4" steel shank, carbide tipped, 60º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
90º V Bit
Two flute, 1/4" steel shank, carbide tipped, 90º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
1/8″ Roman Ogee
Two cutter, 1/4" steel shank, carbide tipped, Roman Ogee bit, with 1/8" radius. These bits are used for decorative panel and edge work.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
3/16″ Roman Ogee
Two flute, 1/2 inch steel shank, carbide tipped, Roman Ogee bit, with 3/16 inch radius. These bits are used for decorative panel and edge work.
Specifications
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
3/8″ Classic Ogee
Two flute, 1/4 inch steel shank, carbide tipped, Classical Ogee bit, with 3/8 inch radius. These bits are used for decorative panel and edge work.
Specifications
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer
1/2″ Classic Ogee
Two flute, 1/2 inch steel shank, carbide tipped, Classical Ogee bit, with 1/2 inch radius. These bits are used for decorative panel and edge work.
Specifications
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
1/4” Round Over
Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/4 inch radius. These bits are used for bead, veining, and edge work.
Specifications
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
1/2” Round Over
Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/2 inch radius. These bits are used for bead, veining, and edge work.
Specifications
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
3/8″ Straight Bit
Two flute, 1/2 inch steel shank, carbide tipped, straight bit, with 3/8 inch diameter. These bits are used for jointing, pocket cutting, and edge work.
Specifications
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer
Keyhole Bit
Two flute, 1/4 inch steel shank, carbide tipped, keyhole bit, with 3/8 inch diameter. Sold as replacement for use with the CarveWright Keyhole function add-on.
Specifications
• Requires Keyhole Function Add-on
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• Required Designer 3 or higher
BIT SETS
Pick from our pre-configured bit sets to quickly get the tools you need and save some money while doing it.
BASIC Cutting and Carving Bit Set
This is great basic set of the most often used cutting and carving bits.
Includes:
- 1/16″ Cutting Bit
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/4″ Split Collet
SIGN Makers
Bit Set
This bit set has a selection of the most common used bits for Sign Makers.
Includes
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/4″ Split Collet
- Degree V Bit
- Degree V Bit
- Keyhole Bit w/software
- 1/4" Stop Collars
DECORATIVE
Router Bit Set
The complete set of our decorative router bits all in one place.
Includes
- 60º V Bit
- 90º V Bit
- 1/4″ Ball Nose Bit
- 1/2″ Ball Nose Bit
- 3/8″ Straight Bit
- 3/8″ Classic Ogee Bit
- 1/2″ Classic Ogee Bit
- 1/8″ Roman Ogee Bit
- 3/16″ Roman Ogee Bit
- 1/4″ Round Over Bit
- 1/2″ Round Over Bit
- 1/4″ Collet
- 1/4″ Stop Collars
- 1/2″ Stop Collars
PRO Cutting and
Carving Bit Set
The complete set of all our cutting and carving bits all in one place.
Includes
- 1/32″ Carving Bit
- 1/16″ Cutting Bit w/split collet
- 1/16″ Carving Bit
- 1/8″ Cutting Bit
- 1/8″ Carving Bit
- 3/16″ Cutting Bit
- 3/16″ Carving Bit
- 1/16″ Long Carving Bit
- 1/8″ Long Carving Bit