Bits For Every Job

Specifically Configured For Your CarveWright System

CARVING BITS

Carving bits are used for the detailed carving or “raster” functions.

1/16” Carving Bit (White)

The default carving bit included with every CarveWright CNC.

Specifications:

  • 1/16” Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Tapered 3 Flute Up Spiral
  • Solid Carbide
  • Max Depth 0.800”
  • Selectable with all versions of Designer

$49.49

1/8″ Carving Bit (Green)

For carving foam and soft materials such as balsa or foam.

Specifications:

  • 1/8” Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Straight 3 flute Up Spiral
  • Solid Carbide
  • Max Depth 1.000”
  • Selectable with all versions of Designer

$49.49

3/16” Carving Bit (Purple)

For faster carving of low detail projects or large signs.

Specifications:

  • 3/16” Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Straight 3 flute Up Spiral
  • Solid Carbide
  • Max Depth 1.000”
  • Selectable with all versions of Designer

$49.49

1/32” Carving Bit (Lime)

For fine detail carvings such as lithophanes or smaller carvings.

Specifications:

  • 1/32” Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Tapered 3 Flute Up Spiral
  • Solid Carbide
  • Max Depth 0.800”
  • Requires Designer 3 or higher

$49.49

1/16" Long Carving Bit (Red)

For fine detailed deep carvings.
Not for use with the Rotary Jig.

Specifications:

  • 1/16″ Long Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Tapered 3 Flute Up Spiral
  • Solid Carbide
  • Max Depth 2.125”
  • Requires Designer 3 or higher

$98.99

CarveWright 1/8" Long carving bit

1/8" Long Carving Bit (Blue)

For deep carving in hard materials and for use with the Rotary Jig.

Specifications:

  • 1/8” Long Ballnose
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Tapered 3 Flute Up Spiral
  • Solid Carbide
  • Max Depth 2.125”
  • Requires Designer 3 or higher

$98.99

CUTTING BITS

Cutting bits are used mostly for doing vector cutout functions.
The bit will follow a path, or line, designated in the software to cut an object out, drill holes, or route lines into the material.

1/16” Cutting Bit

For shallow fine detail and intricate vector cuts.

Specifications:

  • 1/16” Endmill
  • Straight 3 Flute Up Spiral
  • Solid Carbide
  • Max Depth 1/4”
  • Includes 1/4″ Split Collet (unless specified)
  • Selectable with all versions of Designer

$34.99

1/8” Cutting Bit (Orange)

For vector cuts in soft or medium hard materials.

Specifications:

  • 1/8” Endmill
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Straight 3 flute Up Spiral
  • Solid Carbide
  • Max Depth 1.100”
  • Selectable with all versions of Designer

$49.49

3/16” Cutting Bit (Yellow)

For vector cuts in hard or dense materials. 

Specifications:

  • 3/16” Endmill
  • 1/2″ NO SLIP Hard Pressed Adaptor
  • Straight 3 flute Up Spiral
  • Solid Carbide
  • Max Depth 1.100”
  • Selectable with all versions of Designer

$49.49

DECORATIVE ROUTER BITS

Cutting bits are used mostly for doing vector cutout functions.
The bit will follow a path, or line, designated in the software to cut an object out, drill holes, or route lines into the material.

1/4 ball nose

1/4″ Ball Nose

Two flute, 1/4″ steel shank, carbide tipped, with 1/4″ diameter ball end. This ball nose bit can be used for decorative line carving, carving profiles, edge work and engraving.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$30.79

1/2" Ball Nose

1/2″ Ball Nose

Two flute, 1/4″ steel shank, carbide tipped, with 1/2″ diameter ball end. This ball nose bit can be used for decorative line carving, carving profiles, edge work and engraving.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$30.79

60 Degree V Bit

60º V Bit

Two flute, 1/4″ steel shank, carbide tipped, 60º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$43.99

90 Degree V Bit

90º V Bit

Two flute, 1/4″ steel shank, carbide tipped, 90º V bit, with sharp point. They are used for decorative line carving, carving profiles, Centerline Text and chip style Vector Group carvings.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$43.99

1/8 Roman Ogee

1/8″ Roman Ogee

Two cutter, 1/4″ steel shank, carbide tipped, Roman Ogee bit, with 1/8″ radius. These bits are used for decorative panel and edge work.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$49.49

3/16" Roman Ogee

3/16″ Roman Ogee

Two flute, 1/2 inch steel shank, carbide tipped, Roman Ogee bit, with 3/16 inch radius. These bits are used for decorative panel and edge work.

Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer

$49.49

3/8" Classic Ogee

3/8″ Classic Ogee

Two flute, 1/4 inch steel shank, carbide tipped, Classical Ogee bit, with 3/8 inch radius. These bits are used for decorative panel and edge work.

Specifications:
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• All versions of Designer

$49.49

1/2" Classic Ogee

1/2″ Classic Ogee

Two flute, 1/2 inch steel shank, carbide tipped, Classical Ogee bit, with 1/2 inch radius. These bits are used for decorative panel and edge work.

Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer

$49.49

1/4'' Round Over

1/4” Round Over

Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/4 inch radius. These bits are used for bead, veining, and edge work.

Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer

$37.39

1/2" Round Over

1/2” Round Over

Two flute, 1/2 inch steel shank, carbide tipped, round over bit, with 1/2 inch radius. These bits are used for bead, veining, and edge work.

Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer

$49.49

3/8 straight bit

3/8″ Straight Bit

Two flute, 1/2 inch steel shank, carbide tipped, straight bit, with 3/8 inch diameter. These bits are used for jointing, pocket cutting, and edge work.

Specifications:
• No Collet Required
• Recommended: 1/2″ Stop Collar
• All versions of Designer

$30.79

Keyhole bit

Keyhole Bit

Two flute, 1/4 inch steel shank, carbide tipped, keyhole bit, with 3/8 inch diameter. Includes the keyhole function software function.

Specifications:
• Includes Keyhole Function
• Requires 1/4″ Split Collet
• Recommended: 1/4″ Stop Collar
• Required Designer 3 or higher

$24.99

BIT SETS

Pick from our pre-configured bit sets to quickly get the tools you need and save some money while doing it.

BASIC Bit Set

$297.00

This is great basic set of the most often used cutting and carving bits.

Includes:

  • 1/16″ Cutting Bit
  • 1/16″ Carving Bit
  • 1/8″ Cutting Bit
  • 1/8″ Carving Bit
  • 3/16″ Cutting Bit
  • 3/16″ Carving Bit
  • 1/4″ Split Collet

SIGN Makers Bit Set

$407.00

This bit set has a selection of the most common used bits for Sign Makers. 

Includes:

  • 1/16″ Carving Bit
  • 1/8″ Cutting Bit
  • 1/8″ Carving Bit
  • 3/16″ Cutting Bit
  • 3/16″ Carving Bit
  • 1/4″ Split Collet
  • Degree V Bit
  • Degree V Bit
  • Keyhole Bit w/software
  • 1/4″ Stop Collars

DECO Router Bit Set

$490.00

The complete set of our decorative router bits all in one place.

Includes:

  • 60º V Bit
  • 90º V Bit
  • 1/4″ Ball Nose Bit
  • 1/2″ Ball Nose Bit
  • 3/8″ Straight Bit
  • 3/8″ Classic Ogee Bit
  • 1/2″ Classic Ogee Bit
  • 1/8″ Roman Ogee Bit
  • 3/16″ Roman Ogee Bit
  • 1/4″ Round Over Bit
  • 1/2″ Round Over Bit
  • 1/4″ Collet
  • 1/4″ Stop Collars
  • 1/2″ Stop Collars

PRO Bit Set

$544.00

The complete set of all our cutting and carving bits all in one place.

Includes:

  • 1/32″ Carving Bit
  • 1/16″ Cutting Bit w/split collet
  • 1/16″ Carving Bit
  • 1/8″ Cutting Bit
  • 1/8″ Carving Bit
  • 3/16″ Cutting Bit
  • 3/16″ Carving Bit
  • 1/16″ Long Carving Bit
  • 1/8″ Long Carving Bit
Scroll to Top